-Print all the pages on 0,2 mm paper (in Polish it is called Bristol or technical block). The last page (6) should be printed on normal printing paper.

-The parts marked * (eg. 32*) should be glued onto 0,2 mm paper. Parts marked with ** (eg. 3**) should be glued onto 1 mm cardboard.

-After finishing page 4 you should assemble all the parts together. The connection of the hands to the body should be reinforced with cyanoacrylate glue ("Super Glue").

-The parts described as "wzr" should be made out of metal or wood. Hoses can be made with thin black wires, eg.  from cheap earphones. I used the wires from a computer mouse. The picture "Rozmieszczenie wezy" on page 6 shows how the hoses should be connected.

-A red mesh pattern on parts (eg. on 9a) shows the parts you have to cut out.



Piotr Koper (aka Klaymen)
dagun@poczta.fm